Arctic Cat 2014 400 ATV Service Manual download pdf (Page 82)

DISASSEMBLING

1. Remove the four Phillips-head screws securing the

top cover; then remove the cover.

KC0019A

2. Remove the vacuum piston assembly from the carbu-

retor body. Account for a spring, spring seat, and the

jet needle.

KC0021A

3. Remove the three screws securing the pump housing.

Account for the diaphragm assembly, spring, and

U-ring (in the housing).

CC748

4. Remove the Phillips-head screws securing the float

chamber; then remove the chamber. Account for the

O-ring.

KC0022A

KC0063A

5. Remove the float pin.

KC0024A

6. Lift the float assembly from the carburetor. Account

for the float valve and clip.

KC0025A

NOTE: Note the locations of the jets, pilot screw,

and holder for disassembling procedures.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 123 124

No comments

Arctic Cat 2014 400 ATV Service Manual Page 82